OFFICE HOURS

Monday - Friday
08.00-17.00 CET

SALES SUPPORT

[email protected]
+46 40 15 58 59

DT300

Service Tool

DT300 is a unique instrument that is used for checking and calibration of detectors with semi conductive sensors.

A recurring concern when calibrating sensors is to know if the air is clean or contaminated. Traditionally, this has been accomplished by applying synthetic air or ”zero gas” from a bottle. DT300 features a unique design with an integrated reference sensor that makes it
possible to calibrate the relevant sensor without applying gas.

Function

The unit is equipped with a reference sensor (ordered separately)
for the relevant gas.

The reference sensor is plugged into the unit and the LCD display
indicates when the sensor is heated and ready to use.

The reference value for the gas appears in the LCD display.

The value is then used to calibrate offset-value on the relevant detector.

Alphanumeric LCD display shows:

•The integrated reference sensors offset-value

•Offset-value on the tested detector

•System voltage (+5 V)

•C-, B-and A-alarm levels

TECHNICAL DATA:

For control and calibration of
semiconductor detectors


For control and adjustment of alarm levels of monitoring units


Integrated reference sensor for measuring the temperature of gas or other
contamination in the detector being tested


Exchangeable factory ”plug-in” sensors are available for H2, HC, HFC / HFO, NH3 and VOCs


Allows calibration of the current sensor without introducing calibration gas


Power supply: 4 x AA alkaline (8h) or rechargeable

Ni-Mh (10h) batteries


LED indicator for battery level


Dimensions WxHxD: 100x165x44mm


Weight: 365g (including batteries)

 

Order Code Model Details PG
60-130 DT300 Diagnostic tool, base unit * A

SM300
Pre calibrated sensor for DT300

Learn more...

DT300 is a unique instrument that is used for checking and calibration of detectors with semi conductive sensors.

A recurring concern when calibrating sensors is to know if the air is clean or contaminated. Traditionally, this has been accomplished by applying synthetic air or ”zero gas” from a bottle. DT300 features a unique design with an integrated reference sensor that makes it
possible to calibrate the relevant sensor without applying gas.

Function

The unit is equipped with a reference sensor (ordered separately)
for the relevant gas.

The reference sensor is plugged into the unit and the LCD display
indicates when the sensor is heated and ready to use.

The reference value for the gas appears in the LCD display.

The value is then used to calibrate offset-value on the relevant detector.

Alphanumeric LCD display shows:

•The integrated reference sensors offset-value

•Offset-value on the tested detector

•System voltage (+5 V)

•C-, B-and A-alarm levels

TECHNICAL DATA:

For control and calibration of
semiconductor detectors


For control and adjustment of alarm levels of monitoring units


Integrated reference sensor for measuring the temperature of gas or other
contamination in the detector being tested


Exchangeable factory ”plug-in” sensors are available for H2, HC, HFC / HFO, NH3 and VOCs


Allows calibration of the current sensor without introducing calibration gas


Power supply: 4 x AA alkaline (8h) or rechargeable

Ni-Mh (10h) batteries


LED indicator for battery level


Dimensions WxHxD: 100x165x44mm


Weight: 365g (including batteries)

Order CodeModelDetailsPG
60-130DT300Diagnostic tool, base unit *A

SM300
Pre calibrated sensor for DT300

Learn more...